Overlooking Countless Small Mountains (Xiamen) Electric Power Technology Co., Ltd. is one of the leading manufacturers and suppliers of 240w foldable monocrystalline solar panel in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk premium 240w foldable monocrystalline solar panel from our factory.
PE-240W | Portable Solar Panels
240W foldable solar panel manufacturer for higher-input portable power systems
PE-240W is a 240W foldable monocrystalline solar panel designed for portable power-station charging where more solar input is required than a compact 100W panel can provide. Its verified electrical baseline is 24.6V open-circuit voltage, 20.5V working voltage and 11.7A working current, with an IP65 panel rating.
Electrical Operating Point
Match 24.6V Voc and 20.5V / 11.7A working output to the receiving MPPT input
The most important procurement check is whether the power station can accept the PE-240W electrical operating range. A connector that physically fits does not by itself prove electrical compatibility.
240W
Use 240W as the panel's rated output under its specified test conditions, not as a guaranteed field charging rate.
24.6V Voc
The receiver's maximum PV input voltage must remain above the panel's open-circuit requirement with adequate design margin.
20.5V
The verified working-voltage value should sit within the receiving device's supported solar-input range.
11.7A
Check the power station's accepted PV current so the higher-current 240W panel can be used correctly.
| Rated Power | 240W |
|---|---|
| Panel Material | Monocrystalline silicon |
| Efficiency Reference | 23% |
| Open-Circuit Voltage | 24.6V |
| Working Voltage | 20.5V |
| Working Current | 11.7A |
| Protection Rating | IP65 |
Collection Area
The 240W format prioritizes solar collection over minimum packed size
PE-240W unfolds to 2529 × 590 × 35 mm, creating a substantially larger deployed footprint than the PE-100W. That makes site space and panel orientation part of the buying decision.
- Unfolded dimensions: 2529 × 590 × 35 mm
- Allow enough clear ground area for full deployment
- Avoid partial shading across the collection surface
- Route the charging cable so it does not pull the panel out of position
Deployment Hardware
Integrated rear supports simplify repeatable field setup
The current product images show two rear support stands and onboard cable storage. These features help a distributor or project buyer evaluate how the panel will be deployed, packed and moved between charging locations.
Dual rear stands
Use the stands to position the panel toward available sunlight on a stable surface.
Integrated carry openings
The enclosure includes carry openings for moving the panel between storage and deployment points.
Rear cable retention
The current imagery shows the lead stored against the rear panel when the unit is not connected.
Connector Path
Confirm the connector and adapter path together with voltage and current
Current project planning identifies DC7909 and MC4 connection paths for the portable-panel range, while the latest PE-240W imagery shows the stored multi-connector lead. Exact compatibility with a named power-station SKU should still be verified before order release.
- Confirm the receiving power station's solar-input voltage range
- Confirm the accepted current against the 11.7A working-current reference
- Specify the required connector or adapter in the quotation
- Do not treat a physical connector match as proof of electrical compatibility
Field Charging
240W portable solar input for larger camping, mobile and remote-power packages
Higher panel wattage for a larger solar-input target
Use PE-240W where the receiving power station can accept the panel's voltage/current profile and the project benefits from more solar input than a 100W panel can provide.
Plan around solar window, shading and receiver limits
Actual charge energy depends on sunlight, orientation, temperature, cable losses and the power station's input limit; 240W is the panel rating, not a guaranteed field input.
Transport Footprint
665 × 590 × 60 mm folded size and 9 kg net weight
PE-240W is portable, but it is not positioned as the smallest panel in the range. The 9 kg weight and larger folded profile should be considered when planning cartons, vehicle storage, rental kits and distributor bundles.
- Folded dimensions: 665 × 590 × 60 mm
- Unfolded dimensions: 2529 × 590 × 35 mm
- Net weight: 9 kg
- Monocrystalline panel construction
- Verified IP65 panel rating
PE-100W vs PE-240W
Choose 240W when charging potential matters more than minimum carrying weight
2.4× the rated power of PE-100W
The higher 240W rating is intended for projects with a larger solar-input target, provided the receiving device can accept the electrical profile.
Lower transport weight
PE-100W is the lighter 4.5 kg option; PE-240W is 9 kg and uses a larger deployed footprint.
Receiver input determines fit
Panel wattage alone is not enough. Voltage, current, connector path, available solar window and transport requirements should be reviewed together.
Technical Specifications
PE-240W Technical Specifications for Procurement Review
| Model | PE-240W |
|---|---|
| Product Type | 240W foldable portable solar panel |
| Panel Material | Monocrystalline silicon |
| Rated Power | 240W |
| Efficiency Reference | 23% |
| Open-Circuit Voltage | 24.6V |
| Working Voltage | 20.5V |
| Working Current | 11.7A |
| Folded Dimensions | 665 × 590 × 60 mm |
| Unfolded Dimensions | 2529 × 590 × 15 mm |
| Net Weight | 9 kg |
| Protection Rating | IP65 |
| Power-Station Compatibility | Must be confirmed from receiving PV input range and connector/adapter path |
| Connector Planning | Project data identifies DC7909 and MC4 connection paths; exact supplied configuration should be confirmed for the commercial SKU |
Wholesale & Bulk Procurement
Wholesale 240W foldable solar panel supply for portable-power brands and distributors
We manufacture PE-240W for buyers sourcing a higher-wattage portable solar panel for power-station bundles, channel programs and project kits. A useful RFQ should define the receiving device and electrical input before packaging or branding details are finalized.
240W Portable Solar Panel Manufacturer
Source from the verified 240W, monocrystalline, 23% efficiency, 24.6V Voc and IP65 product baseline.
Wholesale 240W Foldable Solar Panels
Define target market, quantity, receiving power-station input and connector path before the commercial configuration is approved.
240W Solar Panel Factory QC Scope
Bulk release criteria should verify model marking, panel condition, electrical output, folding hardware, cable/connector configuration and order-specific packing.
Bulk PE-240W Project Requirements
Provide quantity, receiving PV input range, connector or adapter requirement, branding, packaging, documentation and target delivery date.
Frequently Asked Questions
PE-240W purchasing and compatibility questions
Q: What type of solar panel is PE-240W?
A: PE-240W is a 240W foldable monocrystalline portable solar panel with a verified IP65 panel rating.
Q: What are the main PE-240W electrical specifications?
A: The verified baseline is 240W rated power, 24.6V open-circuit voltage, 20.5V working voltage and 11.7A working current.
Q: Is PE-240W compatible with every portable power station?
A: No. Compatibility must be checked against the receiving power station's PV voltage/current range and required connector or adapter path.
Q: What are the folded and unfolded dimensions?
A: PE-240W folds to 665 × 590 × 60 mm and unfolds to approximately 2529 × 590 × 15 mm.
Q: Does a 240W rating mean the power station will always receive 240W?
A: No. Actual charging input varies with sunlight, panel angle, temperature, shading, cable losses and the receiving device's solar-input limit.
Q: Is PE-240W the better choice than PE-100W?
A: Choose PE-240W when the receiving device can use the higher input and the project accepts the larger 9 kg panel. PE-100W is better when lower carrying weight and a smaller deployed footprint are stronger priorities.
Q: Can I buy PE-240W foldable solar panels wholesale?
A: Yes. We can review wholesale requirements from quantity, target power-station input, connector path, destination market, branding, packaging and document needs.
Q: What should I provide for a bulk PE-240W quotation?
A: Provide order quantity, target power-station model or PV input range, required connector or adapter, destination country, branding, packaging, labeling, document requirements and target delivery date.
Provide order quantity, target power-station model or PV input range, required connector or adapter, destination country, branding, packaging, labeling, document requirements and target delivery date.
Request a Quote
Build a bulk PE-240W order around the receiving solar-input specification
Share the target power-station model or PV input voltage/current range, required quantity, connector or adapter path, destination market, branding, packaging, labeling and document needs for technical and commercial review.
Hot Tags: 240w foldable monocrystalline solar panel, China 240w foldable monocrystalline solar panel manufacturers, factory
